What is the purpose of using #4 bars in the slab?

Using #4 bars helps to reinforce the concrete, providing additional tensile strength and preventing cracking.

Why is soil design excluded from this calculation?

Soil design is excluded because it requires a separate analysis based on the specific site conditions, which can significantly affect the slab's performance.

What does IRC R506 cover?

IRC R506 provides guidelines for the design and construction of concrete slabs on grade, ensuring they meet safety and performance standards.

10 by 14 ft slab at 5 inches

Calculate the specifications for a 10 ft by 14 ft residential slab at 5 in thickness with #4 bars at 18 in spacing. Ensure compliance with IRC R506 standards.

Formula SSC-2026.1

Formula SSC-2026.1 · 4,000 PSI

Order volume

2.38 yd³

1.817 m³ placed+waste

Order weight

9,625 lb

4,366 kg

80 lb bags

107

3 pallets at 42 bags

60 lb bags

143

0.45 ft³ yield each

Rebar

198.00 ft

17 × 20 ft · 17 × 6 m · 145 lb

Ready-mix vs bags

$517.13

Truck $517.13 · 80 lb bags $722.25

Slab footprint and rebar gridLive scaled blueprint

Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.

Bill of materials and shopping list
Item	Net	Waste	Order	Unit price	Line total	Source Spec Material / Tool
Ready-mix concrete	2.16 yd³	10%	2.38 yd³ / 1.817 m³	USD	$392.13	Source Spec Material / Tool
Short-load fee	Under 4 yd³	—	1 truck @ 10 yd³	USD	$125.00	Source Spec Material / Tool
80 lb pre-mix bags	97.2 bags	10%	107 bags	USD	$722.25	Source Spec Material / Tool
60 lb pre-mix bags	129.6 bags	10%	143 bags	USD	$772.20	Source Spec Material / Tool
#4 rebar sticks, 20 ft	17 sticks	10%	19 sticks / 17 × 6 m	USD	$266.00	Source Spec Material / Tool
Rebar chairs	70 crossings	10%	77 chairs	USD	$21.56	Source Spec Material / Tool
Tie wire rolls	70 ties	10%	1 rolls	USD	$8.00	Source Spec Material / Tool

Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.

Ready-mix truck

$517.13

0.24 nominal 10 yd³ loads · 1 to order

80 lb bags

$722.25

60 lb alternative $772.20 · delivery weight 9,625 lb

Side-by-side thickness comparison at the same footprint
Thickness	Order yd³	Order m³	80 lb bags	Rebar ft	Ready-mix	80 lb cost
4 in	1.90	1.454	86	218	$438.70	$580.50
5 in	2.38	1.817	107	218	$517.13	$722.25
6 in	2.85	2.180	129	218	$595.56	$870.75

Show the deterministic formula

Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.

yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.

Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.

Contractor sign-off

Project: 10 by 14 ft slab at 5 inches

Prepared by

Date

Verified by (PE / electrician / inspector)

License number

Signature

This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.

Engineering notes

This calculator is designed for a residential slab measuring 10 ft by 14 ft with a thickness of 5 inches. The slab incorporates #4 reinforcing bars spaced at 18 inches on center, which is essential for enhancing the structural integrity of the slab.

Please note that soil design considerations are excluded from this calculation. It is crucial to evaluate the soil conditions separately to ensure proper support and load distribution for the slab.

Code reference

IRC R506

Field questions

What is the purpose of using #4 bars in the slab?: Using #4 bars helps to reinforce the concrete, providing additional tensile strength and preventing cracking.
Why is soil design excluded from this calculation?: Soil design is excluded because it requires a separate analysis based on the specific site conditions, which can significantly affect the slab's performance.
What does IRC R506 cover?: IRC R506 provides guidelines for the design and construction of concrete slabs on grade, ensuring they meet safety and performance standards.