10 by 16 ft slab at 4 inches
Calculate the design for a residential slab measuring 10 ft by 16 ft at 4 in thickness with #4 bars at 18 in spacing. Ensure compliance with IRC R506 standards.
Formula SSC-2026.1
Formula SSC-2026.1 · 4,000 PSI
Order volume
2.17 yd³
1.661 m³ placed+waste
Order weight
8,800 lb
3,992 kg
80 lb bags
98
3 pallets at 42 bags
60 lb bags
131
0.45 ft³ yield each
Rebar
222.00 ft
18 × 20 ft · 18 × 6 m · 163 lb
Ready-mix vs bags
$483.52
Truck $483.52 · 80 lb bags $661.50
Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.
| Item | Net | Waste | Order | Unit price | Line total | Source Spec Material / Tool |
|---|---|---|---|---|---|---|
| Ready-mix concrete | 1.98 yd³ | 10% | 2.17 yd³ / 1.661 m³ | USD | $358.52 | Source Spec Material / Tool |
| Short-load fee | Under 4 yd³ | — | 1 truck @ 10 yd³ | USD | $125.00 | Source Spec Material / Tool |
| 80 lb pre-mix bags | 88.9 bags | 10% | 98 bags | USD | $661.50 | Source Spec Material / Tool |
| 60 lb pre-mix bags | 118.5 bags | 10% | 131 bags | USD | $707.40 | Source Spec Material / Tool |
| #4 rebar sticks, 20 ft | 18 sticks | 10% | 20 sticks / 18 × 6 m | USD | $280.00 | Source Spec Material / Tool |
| Rebar chairs | 77 crossings | 10% | 85 chairs | USD | $23.80 | Source Spec Material / Tool |
| Tie wire rolls | 77 ties | 10% | 1 rolls | USD | $8.00 | Source Spec Material / Tool |
Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.
Ready-mix truck
$483.52
0.22 nominal 10 yd³ loads · 1 to order
80 lb bags
$661.50
60 lb alternative $707.40 · delivery weight 8,800 lb
| Thickness | Order yd³ | Order m³ | 80 lb bags | Rebar ft | Ready-mix | 80 lb cost |
|---|---|---|---|---|---|---|
| 4 in | 2.17 | 1.661 | 98 | 244 | $483.52 | $661.50 |
| 5 in | 2.72 | 2.077 | 123 | 244 | $573.15 | $830.25 |
| 6 in | 3.26 | 2.492 | 147 | 244 | $662.78 | $992.25 |
Show the deterministic formula
Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.
yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.
Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.
Contractor sign-off
Project: 10 by 16 ft slab at 4 inches
Prepared by
Date
Verified by (PE / electrician / inspector)
License number
Signature
This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.
Engineering notes
This calculator is designed to assist in the preliminary design of a residential slab that measures 10 ft by 16 ft and has a thickness of 4 inches. The slab incorporates #4 reinforcing bars spaced at 18 inches on center. Please note that soil design considerations are excluded from this calculation.
For compliance, refer to the International Residential Code (IRC) Section R506, which provides guidelines for concrete floor slabs on grade.
Code reference
IRC R506
Field questions
- What is the purpose of using #4 bars in the slab?
- The #4 bars provide reinforcement to the concrete slab, helping to control cracking and improve structural integrity.
- Why is soil design excluded from this calculation?
- Soil design is a separate consideration that depends on the specific site conditions and soil characteristics, which are not addressed in this calculator.
- What thickness is recommended for residential slabs?
- For most residential applications, a thickness of 4 inches is commonly used, but it should be verified based on local building codes and site conditions.