10 by 30 ft slab at 4 inches
Calculate the requirements for a residential slab measuring 10 ft by 30 ft at 4 inches thick with #4 bars at 18 inches. Ensure compliance with IRC R506 standards.
Formula SSC-2026.1
Formula SSC-2026.1 · 4,000 PSI
Order volume
4.07 yd³
3.115 m³ placed+waste
Order weight
16,500 lb
7,484 kg
80 lb bags
184
5 pallets at 42 bags
60 lb bags
245
0.45 ft³ yield each
Rebar
420.00 ft
35 × 20 ft · 35 × 6 m · 309 lb
Ready-mix vs bags
$672.22
Truck $672.22 · 80 lb bags $1,242.00
Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.
| Item | Net | Waste | Order | Unit price | Line total | Source Spec Material / Tool |
|---|---|---|---|---|---|---|
| Ready-mix concrete | 3.70 yd³ | 10% | 4.07 yd³ / 3.115 m³ | USD | $672.22 | Source Spec Material / Tool |
| Short-load fee | Full load | — | 1 truck @ 10 yd³ | USD | $0.00 | Source Spec Material / Tool |
| 80 lb pre-mix bags | 166.7 bags | 10% | 184 bags | USD | $1,242.00 | Source Spec Material / Tool |
| 60 lb pre-mix bags | 222.2 bags | 10% | 245 bags | USD | $1,323.00 | Source Spec Material / Tool |
| #4 rebar sticks, 20 ft | 35 sticks | 10% | 39 sticks / 35 × 6 m | USD | $546.00 | Source Spec Material / Tool |
| Rebar chairs | 147 crossings | 10% | 162 chairs | USD | $45.36 | Source Spec Material / Tool |
| Tie wire rolls | 147 ties | 10% | 1 rolls | USD | $8.00 | Source Spec Material / Tool |
Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.
Ready-mix truck
$672.22
0.41 nominal 10 yd³ loads · 1 to order
80 lb bags
$1,242.00
60 lb alternative $1,323.00 · delivery weight 16,500 lb
| Thickness | Order yd³ | Order m³ | 80 lb bags | Rebar ft | Ready-mix | 80 lb cost |
|---|---|---|---|---|---|---|
| 4 in | 4.07 | 3.115 | 184 | 462 | $672.22 | $1,242.00 |
| 5 in | 5.09 | 3.894 | 230 | 462 | $840.28 | $1,552.50 |
| 6 in | 6.11 | 4.672 | 275 | 462 | $1,008.33 | $1,856.25 |
Show the deterministic formula
Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.
yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.
Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.
Contractor sign-off
Project: 10 by 30 ft slab at 4 inches
Prepared by
Date
Verified by (PE / electrician / inspector)
License number
Signature
This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.
Engineering notes
This calculator is designed to assist in the preliminary design of a residential slab measuring 10 ft by 30 ft and 4 inches thick. The use of #4 bars spaced at 18 inches is specified for reinforcement. Please note that soil design considerations are excluded from this calculation.
For compliance, refer to IRC R506, which outlines the requirements for concrete slabs in residential construction.
Code reference
IRC R506
Field questions
- What is the purpose of using #4 bars in the slab?
- The #4 bars provide reinforcement to the concrete slab, helping to control cracking and improve structural integrity.
- Why is soil design excluded from this calculation?
- Soil design is a complex aspect that requires site-specific analysis and should be conducted by a qualified engineer to ensure proper load-bearing capacity.
- What thickness is recommended for a residential slab?
- A thickness of 4 inches is commonly recommended for residential slabs, but this may vary based on specific load requirements and local codes.