10 by 8 ft slab at 4 inches
Calculate the requirements for a residential slab measuring 10 ft by 8 ft at 4 in thickness with #4 bars at 18 in spacing. Ensure compliance with IRC R506 standards.
Formula SSC-2026.1
Formula SSC-2026.1 · 4,000 PSI
Order volume
1.09 yd³
0.831 m³ placed+waste
Order weight
4,400 lb
1,996 kg
80 lb bags
49
2 pallets at 42 bags
60 lb bags
66
0.45 ft³ yield each
Rebar
116.00 ft
13 × 20 ft · 13 × 6 m · 85 lb
Ready-mix vs bags
$304.26
Truck $304.26 · 80 lb bags $330.75
Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.
| Item | Net | Waste | Order | Unit price | Line total | Source Spec Material / Tool |
|---|---|---|---|---|---|---|
| Ready-mix concrete | 0.99 yd³ | 10% | 1.09 yd³ / 0.831 m³ | USD | $179.26 | Source Spec Material / Tool |
| Short-load fee | Under 4 yd³ | — | 1 truck @ 10 yd³ | USD | $125.00 | Source Spec Material / Tool |
| 80 lb pre-mix bags | 44.4 bags | 10% | 49 bags | USD | $330.75 | Source Spec Material / Tool |
| 60 lb pre-mix bags | 59.3 bags | 10% | 66 bags | USD | $356.40 | Source Spec Material / Tool |
| #4 rebar sticks, 20 ft | 13 sticks | 10% | 15 sticks / 13 × 6 m | USD | $210.00 | Source Spec Material / Tool |
| Rebar chairs | 42 crossings | 10% | 47 chairs | USD | $13.16 | Source Spec Material / Tool |
| Tie wire rolls | 42 ties | 10% | 1 rolls | USD | $8.00 | Source Spec Material / Tool |
Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.
Ready-mix truck
$304.26
0.11 nominal 10 yd³ loads · 1 to order
80 lb bags
$330.75
60 lb alternative $356.40 · delivery weight 4,400 lb
| Thickness | Order yd³ | Order m³ | 80 lb bags | Rebar ft | Ready-mix | 80 lb cost |
|---|---|---|---|---|---|---|
| 4 in | 1.09 | 0.831 | 49 | 128 | $304.26 | $330.75 |
| 5 in | 1.36 | 1.038 | 62 | 128 | $349.07 | $418.50 |
| 6 in | 1.63 | 1.246 | 74 | 128 | $393.89 | $499.50 |
Show the deterministic formula
Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.
yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.
Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.
Contractor sign-off
Project: 10 by 8 ft slab at 4 inches
Prepared by
Date
Verified by (PE / electrician / inspector)
License number
Signature
This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.
Engineering notes
This calculator is designed to assist in the preliminary design of a residential concrete slab measuring 10 ft by 8 ft with a thickness of 4 inches. The slab incorporates #4 rebar spaced at 18 inches on center, which is essential for structural integrity.
Please note that soil design considerations are excluded from this calculation. For accurate soil bearing capacity and other site-specific factors, consulting a licensed engineer is recommended.
Code reference
IRC R506 - Concrete Floors on Ground
Field questions
- What is the purpose of using rebar in a concrete slab?
- Rebar provides tensile strength to the concrete, helping to prevent cracking and improve the overall durability of the slab.
- Why is soil design excluded from this calculator?
- Soil design is site-specific and requires a detailed analysis of soil properties, which is beyond the scope of this calculator. It's important to consult a licensed engineer for soil-related assessments.
- What does IRC R506 cover?
- IRC R506 provides guidelines for the design and construction of concrete floors on ground, including thickness, reinforcement, and placement requirements.
Explore Related Engineering Calculations
- 14 by 12 ft slab at 8 inches
- 14 by 14 ft slab at 4 inches
- 8 by 8 ft slab at 8 inches
- 8 by 10 ft slab at 4 inches
- 14 by 14 ft slab at 5 inches
- 14 by 14 ft slab at 6 inches
- 50 Amp EV Charger Wire Size at 50, 75, and 100 Feet
- Deck Stair Stringer Calculator, 36 to 96 Inch Rise
- 6/12 Roof Pitch, Rafter Length, and Shingle Bundles
- 20 ft dry, US 48×40 pallets: Pallet Count, CBM, and Payload