14 by 10 ft slab at 6 inches
Calculate the requirements for a residential slab measuring 14 ft by 10 ft at 6 in thickness with #4 bars at 18 in spacing. Ensure compliance with IRC R506 standards.
Formula SSC-2026.1
Formula SSC-2026.1 · 4,000 PSI
Order volume
3.75 yd³
2.866 m³ placed+waste
Order weight
15,180 lb
6,886 kg
80 lb bags
169
5 pallets at 42 bags
60 lb bags
225
0.45 ft³ yield each
Rebar
294.00 ft
23 × 20 ft · 23 × 6 m · 216 lb
Ready-mix vs bags
$743.44
Truck $743.44 · 80 lb bags $1,140.75
Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.
| Item | Net | Waste | Order | Unit price | Line total | Source Spec Material / Tool |
|---|---|---|---|---|---|---|
| Ready-mix concrete | 3.41 yd³ | 10% | 3.75 yd³ / 2.866 m³ | USD | $618.44 | Source Spec Material / Tool |
| Short-load fee | Under 4 yd³ | — | 1 truck @ 10 yd³ | USD | $125.00 | Source Spec Material / Tool |
| 80 lb pre-mix bags | 153.3 bags | 10% | 169 bags | USD | $1,140.75 | Source Spec Material / Tool |
| 60 lb pre-mix bags | 204.4 bags | 10% | 225 bags | USD | $1,215.00 | Source Spec Material / Tool |
| #4 rebar sticks, 20 ft | 23 sticks | 10% | 26 sticks / 23 × 6 m | USD | $364.00 | Source Spec Material / Tool |
| Rebar chairs | 70 crossings | 10% | 77 chairs | USD | $21.56 | Source Spec Material / Tool |
| Tie wire rolls | 70 ties | 10% | 1 rolls | USD | $8.00 | Source Spec Material / Tool |
Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.
Ready-mix truck
$743.44
0.37 nominal 10 yd³ loads · 1 to order
80 lb bags
$1,140.75
60 lb alternative $1,215.00 · delivery weight 15,180 lb
| Thickness | Order yd³ | Order m³ | 80 lb bags | Rebar ft | Ready-mix | 80 lb cost |
|---|---|---|---|---|---|---|
| 4 in | 3.10 | 2.367 | 140 | 323 | $635.89 | $945.00 |
| 5 in | 3.42 | 2.616 | 154 | 323 | $689.67 | $1,039.50 |
| 6 in | 3.75 | 2.866 | 169 | 323 | $743.44 | $1,140.75 |
Show the deterministic formula
Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.
yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.
Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.
Contractor sign-off
Project: 14 by 10 ft slab at 6 inches
Prepared by
Date
Verified by (PE / electrician / inspector)
License number
Signature
This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.
Engineering notes
This calculator is designed to assist in the design of a residential concrete slab measuring 14 ft by 10 ft with a thickness of 6 inches. Reinforcement is provided using #4 bars spaced at 18 inches. Please note that soil design considerations are excluded from this calculation.
For compliance, refer to the International Residential Code (IRC) Section R506, which outlines the requirements for concrete slabs, including reinforcement and thickness specifications.
Code reference
IRC R506
Field questions
- What is the purpose of using #4 bars in the slab?
- Using #4 bars helps to reinforce the concrete slab, providing additional tensile strength and reducing the risk of cracking.
- Why is soil design excluded from this calculation?
- Soil design is excluded because it requires specific site analysis and testing, which is beyond the scope of this calculator.
- What thickness is recommended for residential slabs?
- The recommended thickness for residential slabs is typically 4 to 6 inches, depending on the load and usage.
- How do I ensure my slab meets IRC R506 requirements?
- To ensure compliance with IRC R506, follow the guidelines for slab thickness, reinforcement spacing, and proper curing methods as outlined in the code.