14 by 18 ft slab at 6 inches
Calculate the requirements for a residential slab measuring 14 ft by 18 ft at 6 in thick with #4 bars at 18 in spacing. Ensure compliance with IRC R506 while excluding soil design considerations.
Formula SSC-2026.1
Formula SSC-2026.1 · 4,000 PSI
Order volume
6.36 yd³
4.859 m³ placed+waste
Order weight
25,740 lb
11,675 kg
80 lb bags
286
7 pallets at 42 bags
60 lb bags
382
0.45 ft³ yield each
Rebar
490.00 ft
31 × 20 ft · 31 × 6 m · 360 lb
Ready-mix vs bags
$1,048.67
Truck $1,048.67 · 80 lb bags $1,930.50
Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.
| Item | Net | Waste | Order | Unit price | Line total | Source Spec Material / Tool |
|---|---|---|---|---|---|---|
| Ready-mix concrete | 5.78 yd³ | 10% | 6.36 yd³ / 4.859 m³ | USD | $1,048.67 | Source Spec Material / Tool |
| Short-load fee | Full load | — | 1 truck @ 10 yd³ | USD | $0.00 | Source Spec Material / Tool |
| 80 lb pre-mix bags | 260.0 bags | 10% | 286 bags | USD | $1,930.50 | Source Spec Material / Tool |
| 60 lb pre-mix bags | 346.7 bags | 10% | 382 bags | USD | $2,062.80 | Source Spec Material / Tool |
| #4 rebar sticks, 20 ft | 31 sticks | 10% | 35 sticks / 31 × 6 m | USD | $490.00 | Source Spec Material / Tool |
| Rebar chairs | 130 crossings | 10% | 143 chairs | USD | $40.04 | Source Spec Material / Tool |
| Tie wire rolls | 130 ties | 10% | 1 rolls | USD | $8.00 | Source Spec Material / Tool |
Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.
Ready-mix truck
$1,048.67
0.64 nominal 10 yd³ loads · 1 to order
80 lb bags
$1,930.50
60 lb alternative $2,062.80 · delivery weight 25,740 lb
| Thickness | Order yd³ | Order m³ | 80 lb bags | Rebar ft | Ready-mix | 80 lb cost |
|---|---|---|---|---|---|---|
| 4 in | 5.05 | 3.862 | 228 | 539 | $833.56 | $1,539.00 |
| 5 in | 5.70 | 4.361 | 257 | 539 | $941.11 | $1,734.75 |
| 6 in | 6.36 | 4.859 | 286 | 539 | $1,048.67 | $1,930.50 |
Show the deterministic formula
Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.
yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.
Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.
Contractor sign-off
Project: 14 by 18 ft slab at 6 inches
Prepared by
Date
Verified by (PE / electrician / inspector)
License number
Signature
This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.
Engineering notes
This calculator is designed to assist in the design of a residential concrete slab measuring 14 ft by 18 ft with a thickness of 6 inches. The use of #4 reinforcing bars spaced at 18 inches is specified to enhance the structural integrity of the slab.
Please note that soil design considerations are excluded from this calculation. For full compliance with the International Residential Code (IRC) R506, it is essential to consult with a licensed engineer for site-specific soil conditions.
Code reference
IRC R506
Field questions
- What is the purpose of using #4 bars in the slab?
- Using #4 bars helps to reinforce the concrete slab, providing additional tensile strength and reducing the risk of cracking.
- Why is soil design excluded from this calculation?
- Soil design is site-specific and depends on various factors such as soil type and load-bearing capacity, which are not addressed in this calculator.
- What thickness is recommended for a residential slab?
- A thickness of 6 inches is commonly recommended for residential slabs, but it may vary based on specific load requirements and local codes.
- How do I ensure compliance with IRC R506?
- To ensure compliance with IRC R506, follow the guidelines for slab design and reinforcement, and consult with a licensed engineer for site-specific conditions.