What is the purpose of using #4 bars in the slab?

The #4 bars provide reinforcement to the concrete slab, helping to control cracking and improve structural integrity.

Why is soil design excluded from this calculation?

Soil design is a separate consideration that depends on the specific site conditions and is not included in this slab design calculator.

What thickness is recommended for a residential slab?

The recommended thickness for a residential slab can vary, but an 8-inch thickness is commonly used for added strength and durability.

14 by 20 ft slab at 8 inches

Calculate the specifications for a 14 ft by 20 ft residential slab with 8 in thickness and #4 bars at 18 in spacing. Ensure compliance with IRC R506 standards.

Formula SSC-2026.1

Formula SSC-2026.1 · 4,000 PSI

Order volume

8.47 yd³

6.479 m³ placed+waste

Order weight

34,320 lb

15,567 kg

80 lb bags

382

10 pallets at 42 bags

60 lb bags

509

0.45 ft³ yield each

Rebar

532.00 ft

32 × 20 ft · 42 × 6 m · 391 lb

Ready-mix vs bags

$1,398.22

Truck $1,398.22 · 80 lb bags $2,578.50

Slab footprint and rebar gridLive scaled blueprint

Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.

Bill of materials and shopping list
Item	Net	Waste	Order	Unit price	Line total	Source Spec Material / Tool
Ready-mix concrete	7.70 yd³	10%	8.47 yd³ / 6.479 m³	USD	$1,398.22	Source Spec Material / Tool
Short-load fee	Full load	—	1 truck @ 10 yd³	USD	$0.00	Source Spec Material / Tool
80 lb pre-mix bags	346.7 bags	10%	382 bags	USD	$2,578.50	Source Spec Material / Tool
60 lb pre-mix bags	462.2 bags	10%	509 bags	USD	$2,748.60	Source Spec Material / Tool
#4 rebar sticks, 20 ft	32 sticks	10%	36 sticks / 42 × 6 m	USD	$504.00	Source Spec Material / Tool
Rebar chairs	140 crossings	10%	154 chairs	USD	$43.12	Source Spec Material / Tool
Tie wire rolls	140 ties	10%	1 rolls	USD	$8.00	Source Spec Material / Tool

Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.

Ready-mix truck

$1,398.22

0.85 nominal 10 yd³ loads · 1 to order

80 lb bags

$2,578.50

60 lb alternative $2,748.60 · delivery weight 34,320 lb

Side-by-side thickness comparison at the same footprint
Thickness	Order yd³	Order m³	80 lb bags	Rebar ft	Ready-mix	80 lb cost
4 in	5.54	4.236	250	585	$914.22	$1,687.50
5 in	6.27	4.797	283	585	$1,035.22	$1,910.25
6 in	7.01	5.358	316	585	$1,156.22	$2,133.00

Show the deterministic formula

Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.

yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.

Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.

Contractor sign-off

Project: 14 by 20 ft slab at 8 inches

Prepared by

Date

Verified by (PE / electrician / inspector)

License number

Signature

This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.

Engineering notes

This calculator is designed for residential slab construction, specifically for a slab measuring 14 ft by 20 ft with a thickness of 8 inches. Reinforcement is provided using #4 bars spaced at 18 inches apart. Please note that soil design considerations are excluded from this calculation.

For compliance, refer to the International Residential Code (IRC) Section R506, which outlines the requirements for concrete floors on ground.

Code reference

IRC R506

Field questions

What is the purpose of using #4 bars in the slab?: The #4 bars provide reinforcement to the concrete slab, helping to control cracking and improve structural integrity.
Why is soil design excluded from this calculation?: Soil design is a separate consideration that depends on the specific site conditions and is not included in this slab design calculator.
What thickness is recommended for a residential slab?: The recommended thickness for a residential slab can vary, but an 8-inch thickness is commonly used for added strength and durability.