What is the purpose of using #4 bars in the slab?

The #4 bars provide reinforcement to the concrete slab, helping to control cracking and improve structural integrity.

Why is soil design excluded from this calculation?

Soil design is excluded because it requires site-specific analysis to determine bearing capacity and other factors that affect slab performance.

What are the dimensions of the slab being calculated?

The slab dimensions are 16 feet by 14 feet with a thickness of 6 inches.

What does IRC R506 cover?

IRC R506 provides guidelines for the design and construction of concrete floors on the ground, including specifications for thickness, reinforcement, and placement.

16 by 14 ft slab at 6 inches

Calculate the specifications for a residential slab measuring 16 ft by 14 ft with #4 bars at 18 in spacing. Ensure compliance with IRC R506 standards. Soil design considerations are excluded.

Formula SSC-2026.1

Formula SSC-2026.1 · 4,000 PSI

Order volume

5.70 yd³

4.361 m³ placed+waste

Order weight

23,100 lb

10,478 kg

80 lb bags

257

7 pallets at 42 bags

60 lb bags

343

0.45 ft³ yield each

Rebar

434.00 ft

27 × 20 ft · 29 × 6 m · 319 lb

Ready-mix vs bags

$941.11

Truck $941.11 · 80 lb bags $1,734.75

Slab footprint and rebar gridLive scaled blueprint

Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.

Bill of materials and shopping list
Item	Net	Waste	Order	Unit price	Line total	Source Spec Material / Tool
Ready-mix concrete	5.19 yd³	10%	5.70 yd³ / 4.361 m³	USD	$941.11	Source Spec Material / Tool
Short-load fee	Full load	—	1 truck @ 10 yd³	USD	$0.00	Source Spec Material / Tool
80 lb pre-mix bags	233.3 bags	10%	257 bags	USD	$1,734.75	Source Spec Material / Tool
60 lb pre-mix bags	311.1 bags	10%	343 bags	USD	$1,852.20	Source Spec Material / Tool
#4 rebar sticks, 20 ft	27 sticks	10%	30 sticks / 29 × 6 m	USD	$420.00	Source Spec Material / Tool
Rebar chairs	110 crossings	10%	121 chairs	USD	$33.88	Source Spec Material / Tool
Tie wire rolls	110 ties	10%	1 rolls	USD	$8.00	Source Spec Material / Tool

Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.

Ready-mix truck

$941.11

0.57 nominal 10 yd³ loads · 1 to order

80 lb bags

$1,734.75

60 lb alternative $1,852.20 · delivery weight 23,100 lb

Side-by-side thickness comparison at the same footprint
Thickness	Order yd³	Order m³	80 lb bags	Rebar ft	Ready-mix	80 lb cost
4 in	4.56	3.489	206	477	$752.89	$1,390.50
5 in	5.13	3.925	231	477	$847.00	$1,559.25
6 in	5.70	4.361	257	477	$941.11	$1,734.75

Show the deterministic formula

Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.

yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.

Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.

Contractor sign-off

Project: 16 by 14 ft slab at 6 inches

Prepared by

Date

Verified by (PE / electrician / inspector)

License number

Signature

This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.

Engineering notes

This calculator is designed to assist in determining the specifications for a residential concrete slab measuring 16 ft by 14 ft with a thickness of 6 inches. Reinforcement with #4 bars placed at 18-inch intervals is included in the design.

Please note that this tool does not account for soil design, which is critical for ensuring the stability and longevity of the slab. Always consult with a qualified engineer for site-specific soil analysis and design considerations.

Code reference

IRC R506 - Concrete Floors on Ground

Field questions

What is the purpose of using #4 bars in the slab?: The #4 bars provide reinforcement to the concrete slab, helping to control cracking and improve structural integrity.
Why is soil design excluded from this calculation?: Soil design is excluded because it requires site-specific analysis to determine bearing capacity and other factors that affect slab performance.
What are the dimensions of the slab being calculated?: The slab dimensions are 16 feet by 14 feet with a thickness of 6 inches.
What does IRC R506 cover?: IRC R506 provides guidelines for the design and construction of concrete floors on the ground, including specifications for thickness, reinforcement, and placement.