What is the purpose of using #4 bars in the slab?

The #4 bars provide reinforcement to help control cracking and improve the structural integrity of the slab.

Why is soil design excluded from this calculation?

Soil design is a critical aspect that requires site-specific analysis and should be evaluated by a qualified engineer to ensure proper support for the slab.

What thickness is recommended for a residential slab?

A thickness of 4 inches is commonly recommended for residential slabs, but this can vary based on specific load requirements and local building codes.

16 by 24 ft slab at 4 inches

Calculate the specifications for a 16 ft by 24 ft residential slab at 4 inches thick with #4 bars at 18 inches, compliant with IRC R506. Soil design considerations are excluded.

Formula SSC-2026.1

Formula SSC-2026.1 · 4,000 PSI

Order volume

5.21 yd³

3.987 m³ placed+waste

Order weight

21,120 lb

9,580 kg

80 lb bags

235

6 pallets at 42 bags

60 lb bags

313

0.45 ft³ yield each

Rebar

536.00 ft

39 × 20 ft · 39 × 6 m · 394 lb

Ready-mix vs bags

$860.44

Truck $860.44 · 80 lb bags $1,586.25

Slab footprint and rebar gridLive scaled blueprint

Grid lines are equalized so the drawing stays readable. The order count uses on-center spacing with a bar at each end of the layout, then holds concrete cover in the field.

Bill of materials and shopping list
Item	Net	Waste	Order	Unit price	Line total	Source Spec Material / Tool
Ready-mix concrete	4.74 yd³	10%	5.21 yd³ / 3.987 m³	USD	$860.44	Source Spec Material / Tool
Short-load fee	Full load	—	1 truck @ 10 yd³	USD	$0.00	Source Spec Material / Tool
80 lb pre-mix bags	213.3 bags	10%	235 bags	USD	$1,586.25	Source Spec Material / Tool
60 lb pre-mix bags	284.4 bags	10%	313 bags	USD	$1,690.20	Source Spec Material / Tool
#4 rebar sticks, 20 ft	39 sticks	10%	43 sticks / 39 × 6 m	USD	$602.00	Source Spec Material / Tool
Rebar chairs	187 crossings	10%	206 chairs	USD	$57.68	Source Spec Material / Tool
Tie wire rolls	187 ties	10%	1 rolls	USD	$8.00	Source Spec Material / Tool

Source links open a product search on the Amazon storefront for the selected currency. SiteSpecCalc may earn a commission. The link does not change the quantities above.

Ready-mix truck

$860.44

0.52 nominal 10 yd³ loads · 1 to order

80 lb bags

$1,586.25

60 lb alternative $1,690.20 · delivery weight 21,120 lb

Side-by-side thickness comparison at the same footprint
Thickness	Order yd³	Order m³	80 lb bags	Rebar ft	Ready-mix	80 lb cost
4 in	5.21	3.987	235	590	$860.44	$1,586.25
5 in	6.52	4.984	294	590	$1,075.56	$1,984.50
6 in	7.82	5.981	352	590	$1,290.67	$2,376.00

Show the deterministic formula

Slab ft³ = L × W × thickness ÷ 12. Thickened-edge extra = footing band × (footing depth − slab thickness), with corner squares counted once.

yd³ = ft³ ÷ 27. m³ = ft³ × 0.0283168. Weight uses 150 lb/ft³, then the header converts that pound total at 1 lb = 0.45359237 kg. 80 lb bags yield 0.6 ft³ and 60 lb bags yield 0.45 ft³. Currency changes the price labels only.

Bars across a span = floor(span ÷ spacing) + 1. Order sticks = that count, plus 10, 5, or 15 percent waste, cut from 20 ft and 6 m stock. Chairs = one per grid intersection.

Contractor sign-off

Project: 16 by 24 ft slab at 4 inches

Prepared by

Date

Verified by (PE / electrician / inspector)

License number

Signature

This sheet is an estimate for ordering and layout discussion. It is not a sealed design. Confirm the quantities with a licensed local professional and the authority having jurisdiction before you buy or build.

Engineering notes

This calculator is designed to assist in determining the specifications for a residential slab measuring 16 ft by 24 ft with a thickness of 4 inches. Reinforcement is provided using #4 bars spaced at 18 inches on center.

Note that soil design considerations are excluded from this calculation. Please ensure to consult a qualified engineer for soil-related assessments and compliance with local building codes.

Code reference

IRC R506 - Concrete Floors on Ground

Field questions

What is the purpose of using #4 bars in the slab?: The #4 bars provide reinforcement to help control cracking and improve the structural integrity of the slab.
Why is soil design excluded from this calculation?: Soil design is a critical aspect that requires site-specific analysis and should be evaluated by a qualified engineer to ensure proper support for the slab.
What thickness is recommended for a residential slab?: A thickness of 4 inches is commonly recommended for residential slabs, but this can vary based on specific load requirements and local building codes.